
5.5 GS720 Grip Strength Meter
Send us an inquiry and our team will respond within 24 hours.
Because of its simplicity and economy, the grip strength meter is the most commonly used in vivo test for monitoring impaired limb strength (fore and/or hind limb) caused by pathology progression and/or chronic exercise in rodents. Because this test is non-invasive and does not damage the muscle, it can be performed over time, being a useful tool to assess the effect of either a short or long-term treatment. When the test is performed in a fashion that maintains rigorous timing, the animals do not lose interest in the test over time.
The device has a self-calibrating and auto-zeroing force sensor, amplifier and peak detector, embedded in the 5-inch touch screen controller. For the results, the controller could simultaneously display the real-time value, peak value and curved graph, and record the peak value when confirming the data by foot pedal or click the button on the screen.
The force value units are available in gf, N and kg.
The grasp accessories for rats and mice include 5 stainless-steel trapeze bars and 2 stainless-steel grasping grids. Also, foot pedal and U-disc are included.
The measured data could be exported to U-disc in csv. format.
Technical Specifications:
- Force Ranges 0-50N (0-5KG) and accuracy 0.1g.
- The grasp accesseries angle adjustment range: ±12.5°.
- Sampling Rate 1000Hz.
- Peak value retention function.
- Strength Unit: N, gf and lbf available.
- Zero calibration could be performed before measurement.
- Touch screen operation, peak force, real-time change value, change curve graph, and saved peak data are shown on the same screen.
- Manually or foot pedal to confirm the collected data and save it.
- Can store 99 sets of x20 test data per set (That is, the peak strength data of 99 animals).
- Data saving can be exported through a USB flash drive, maintaining the format of xls/csv.
- The screen brightness can be adjusted from 10-100%.
- Time and date can be set.
- Power supply: 100-240V wide voltage input.
- Physical dimensions: 250 * 196 * 123mm.